Ancillaries Required: |
Ancillaries Not Required: |
|
| Please remove all of these ancillaries, to avoid any extra costs! | ||
| Clutch Pressure Plate and Disc | Water Hoses | |
| ECU | Metal Water Pipe | |
| 5AS Unit (If fitted) with "blipper" |
Exhaust System | |
| Coil/s | Starter Motor | |
| HT Leads and Distributor Cap (if fitted) | Bell Housing | |
| Flywheel Sensor | Fuel Pipe | |
| Thermostat Housing | Oil Pipes | |
| Inlet Manifold Complete | Air Filter | |
| Alternator & Belt | Wiring Loom | |
Water Outlet with ECU Temperature sensor |
It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition.
This will expedite the work, and save the client added costs.
