Ancillaries Required: |
Ancillaries Not Required: |
|
| Please remove all of these ancillaries, to avoid any extra costs! | ||
| Clutch Pressure Plate and Disc | Water Hoses | |
| ECU | Exhaust System | |
| 5AS Unit (If fitted) with "blipper" | Starter Motor | |
| Coil/s | Oil Cooler | |
| HT Leads and Distributor Cap (if fitted) | Bell Housing | |
| Flywheel Sensor | Fuel Pipe | |
| Thermostat Housing | Oil Pipes Except Sump to Pump | |
| Inlet Manifold Complete | Air Filter | |
| Alternator & Belt if fitted to engine | Wiring Loom | |
| Dry Sump Pump & Belt |
It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition.
This will expedite the work, and save the client added costs.
